製品スペック
Product Specification

BOLT 4K 1500 テクニカルスペック

Transmitter Receiver
Video
Video Inputs 1 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G-SDI, 6G-SDI, or 3G-SDI)
1 x HDMI Type-A receptacle (accepts HDMI 2.0 or HDMI 1.4)
Video Outputs 1 x Loopout 12G-SDI SMPTE 2082-1 standard / 75 Ω 2 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G-SDI, 6G-SDI, or 3G-SDI)
1 x HDMI Type-A receptacle (accepts HDMI 2.0 or HDMI 1.4)
Sdi Ancillary Data Support Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers.
Color Sampling SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit
Input Cross Conversion Yes, HDMI to SDI
Delay Tx To Rx <0.001sec
Supported Resolutions 4Kp23.98/24/25/29.97/30/50/59.94/60
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60
480p50 576p59.94/60
480i(NTSC)/576i(PAL)
Video Processing
Video Compression Visually Lossless
Video Format Conversion Support Connect an HD source to the Tx and get a 4K signal out of Rx
Connect a 4K source to the Tx, get HD resolution out of Rx
You can also mix & match from a single source:
4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx
Input/output configurations are controlled directly on units or via Bolt 4K app
Color Correction None 17x17x17 3D LUT (supports 10-bit color)
Audio Processing
Audio Format 48kHz 24-bit PCM
Audio Input Embedded SDI/HDMI Audio Input (2 Channel)
Audio Output Embedded SDI/HDMI Audio Output (2 Channel)
Dimensions 132 x 91 x 27 mm 112 x 139 x 27 mm
Weight Bolt 4K Tx without antennas (no battery plates) = 360g
Bolt 4K Tx with 4x antennas (no battery plates) = 408g
Bolt 4K Rx without antennas (no battery plates) = 440g
Bolt 4K Rx with 5x antennas (no battery plates) = 496g
Gold-Mount battery plate set (male+female) = +172g
V-Mount battery plate set (male+female) = +220 g
Construction Milled Aluminum(Chassis) and regulation-compliant PCB
Mountability Multiple mounting options with 1/4"x20 and M3 holes
Interfaces
Configuration Interfaces OSD with Menu, Joystick Navigation
Switches On/Off Switch
Desktop App
Usb Interface Functionality Upgrade via Micro-USB
Network
Antennas 4 External 2dBi RP-SMA antennas (included) 5 External 2 dBi antennas (included) or optional Array Panel Antenna
Wireless Non-DFS Frequencies:5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz
DFS Frequencies:5.270 ~ 5.670 GHz
Rf Channel Selection Auto, Manual
Manual available for non-DFS Channels
Channel Bandwidth 14x 40MHz wide channels
Encryption AES-256, RSA-1024 key exchange
Rf Power 19 dbm EIRP (4 external 2dBi antennas) (<80mW transmit power) 17 dbm EIRP (one external 2dBi antenna) (<51mW transmit power)
Range Up to 1500 ft, line of sight
Unicast Multicast Can connect one Transmitter to up to 6 Receivers
Noise Rejection Can coexist with WiFi and 5 GHz cordless phones
Can operate up to 6 sets in same location
Power
Power Input 2-Pin Circular locking Connector 6-28 VDC
Battery None, optional Gold or V mount battery plate
Nominal Power Consumption 20 Watts 18 Watts
Environmental
Operating Temperature 0-40℃